Intelligent Coil Driver iCs for Mono- and Bistable EM Actuators Driver iC for Bistable Actuators with 8 to 36 V Supply
Thursday, May 15, 2014: The program of intelligent and low power loss coil driver iCs for EM actuators, such as relays, valves, or solenoids, has been expanded with a driver for bistable applica-tions. The 32-bit output driver iC-DY6818 features a serial SPI interface for the con-trol via a 3.3 V or 5 V microcontroller. The integrated 32-bit shift register performs the conversion from serial to parallel. A received 32-bit data word is uploaded to an internal register which then operates the 32 push/pull output drivers.
Press photo: Coil Driver iCs
Download text & photo: http://www.ichaus.de/iC-Haus_DY6818_newsrelease_en
The output drivers’ separate supply VBB can range from 8 to 36 V. The adjustment to typical industrial 24 V signal levels is thereby provided. Furthermore, mono- and/or bistable relays, valves, solenoids, small DC motors, as well as LED chains can easi-ly be controlled. The push/pull output drivers supply +/- 25 mA and pairwise they can control a bistable relay or valve with a coil in both idle states. The length of the control impulses is either determined by the microcontroller through reloading of iC-DY6818 or through the activation of the BLNK input. The latter can also be used as a joint PWM clock input for current reduction or for dimming of LEDs. Free-wheeling diodes at the driver outputs are already integrated, each vs. ground and supply for the control of inductive loads. Typical applications are:
– Universal, industrial 24 V circuit boards/interfaces
– Cable, logic and function tester with mono- or bistable relay cards
– Pneumatic or fluid controls with mono- or bistable valve cards
– Microcontroller-operated LED illuminating devices
The supply voltage for the logic part and the output drivers is monitored and the NERR output is activated at undervoltage and when exceeding the permissible chip temperature. iC-DY6818 is designed for an operating temperature range from -40 to +125˚C and the logic part has a typical current consumption of 0.5 to 3 mA. Device iC-DY6818 is available in a QFN48 package or pin-compatible to IC 8618 in a PLCC44 package.
The White Paper Flexible and Low Power Loss Control of Inductive Loads (iC-Haus) gives information about the coil driver applications of iC-Haus. Further information can be found at http://www.ichaus.de/iC-DY6818
About iC-Haus
iC-Haus GmbH is a leading, independent German manufacturer of standard iCs (ASSP) and customized ASiC semiconductor solutions with worldwide representation. For more than 25 years the company has been active in the design, production, and sales of application-specific iCs for industrial, automotive, and medical applications.
The iC-Haus cell libraries in CMOS, bipolar, and BCD technologies are specifically suited to realize the design of sensor, laser/opto, and actuator ASiCs, amongst others. The iCs are assembled in standard plastic packages or using the iC-Haus chip-on-board technology to manufacture complete microsystems, multichip modules, and optoBGA/QFN in conjunction with sensors.
Further information is available at http://www.ichaus.com
If you have any queries, please contact:
Uwe Malzahn
iC-Haus GmbH, Am Kuemmerling 18, 55294 Bodenheim, Germany
Tel. +49 (6135) 9292-300 Web: www.ichaus.com
Fax +49 (6135) 9292-192
