IIT Hyderabad Develops Low-Cost, Eco-Friendly Solar Cells Using Vermilion Dye

  • The dye-sensitised solar cell (DSSC) is based on New Fuchsin (NF) dye with aqueous electrolyte and platinum-free counter electrodes
  • DSSC is a third-generation thin-film organic molecule-based energy conversion device
  • The best performing DSSCs use organic solvent-based liquid electrolytes

Scientists at IIT Hyderabad have developed low-cost, environment-friendly solar cells by employing an off-the-shelf dye used to make kumkum or vermilion in India. 

Representative image

The dye-sensitised solar cell (DSSC) is based on New Fuchsin (NF) dye with aqueous electrolyte and platinum-free counter electrodes, according to the research published in the Solar Energy journal. 

Existing technology and its drawback
The most familiar solar cells today are made up of silicon and can be seen in the various overhead panels and other places, noted Professor Sai Santosh Kumar Raavi from Department of Physics, Indian Institute of Technology (IIT) Hyderabad. 

However, this technology is limited by huge fabrication costs as silicon processing is very expensive and involves very high-temperature methods that leave a large carbon footprint, Raavi, who led the project, told PTI.

An alternative workaround
Since 2010, a lot of efforts have been made to use water-soluble natural and synthetic dyes to make water-based solar cells. In order to get around the limitations of using silicon, the IIT Hyderabad team started working on solar cells based on organic materials, which were supposedly inexpensive and easy to fabricate. 

- Advertisement -

Dye-sensitised solar cell (DSSC) is a third-generation thin-film organic molecule-based energy conversion device. DSSC takes its inspiration from nature, almost mimicking the primary process of photosynthesis the phenomenon in plants, Raavi explained.

Raavi noted that SSCsare generally considered eco-friendlier to produce than conventional solar cells because they require little energy to manufacture. The best performing DSSCs use organic solvent-based liquid electrolytes.

He further explained that the idea of this work is not to run behind the best efficiency. According to Raavi, sometimes, the cost for achieving the highest efficient device overwhelms the actual motivation behind developing a particular class of solar cell technology- which is to be eco-friendly and inexpensive.

In their latest work, Raavi’s team consisting of researchers from Department of Physics and Chemistry (IIT Hyderabad), ARCHEM (University of Hyderabad) NIT Kurukshetra and IFSC-USP, Brazil, employed a very cheap magenta-dye called New Fuchsin, which is used to make kumkum or vermillion when grounded with turmeric. 

- Advertisement -
Loading form…

Industry's Buzz

Anoop Kumar Rai Takes Charge as BEL Director (Marketing)

0
Beyond defence applications, Rai has driven BEL’s diversification into civilian infrastructure Bharat Electronics Limited (BEL) has appointed Anoop Kumar Rai as its Director (Marketing), effective...

BEL Appoints Ambrish Tripathi as Director (Human Resources)

0
Tripathi’s appointment comes as BEL continues to expand its capabilities across defence and strategic technologies Bharat Electronics Limited (BEL) has appointed Ambrish Tripathi as Director...

Suzlon Adds 250 MW Torrent Order, Crosses 1.1 GW in FY27 Orders 

0
Suzlon has secured a 250 MW wind energy order from Torrent Green Energy, taking their cumulative partnership to more than 1.3 GW across three...
Chip Making (representational Image)

India to Revise Semiconductor Rules Within Two Months, Says Piyush Goyal 

0
The planned changes aim to simplify approvals and make it easier for semiconductor manufacturers to source equipment and components from global suppliers.  India will amend...

North American EMS Book-to-Bill Ratio Rises to 1.29 in July 2026

0
The Association cautioned that month-to-month movements can be affected by seasonality and short-term volatility The North American electronics manufacturing services (EMS) sector recorded a book-to-bill...

Learn From Leaders

(L-R) Nikesh Gondchawar, Strategic & Technical Advisor – Robotics Manufacturing; Shrikrushna Kakade, Founder Partner; Nikhil Kakade, Senior Technical Advisor – Robotics & Control Systems, SlightGen Solutions LLP

“A Made-In-India Robotic PCB Soldering System That Automates The Through-Hole Soldering Process!” – Shrikrushna...

0
Electronics manufacturing is complex, and automation often comes at a high cost. To bridge this gap and offer a more affordable solution in India,...
Navdeep Narula, Executive Director, Client and Endpoint Solutions, Ingram Micro, India

“Enterprise Computing Is Shifting From CPU to GPU And Now Toward NPU-Based Systems ”...

0
The shift from CPU to GPU to NPU-based computing is redefining today’s enterprise endpoints. In an exclusive conversation, Navdeep Narula from Ingram Micro discusses...

India’s Robotics Push Opens New Hardware Opportunities

0
How do you build India’s physical AI future when critical robot components still come from overseas? Niqo Robotics reveals where the gaps remain.  India’s push...
Gadhadar Reddy, CEO and Founder, NoPo Nanotechnologies

How A Material Thinner Than Human Hair Could Transform EV Batteries And Electronics –...

0
What if a material 200,000 times thinner than a human hair could transform EV batteries, semiconductors, and advanced electronics? NoPo Nanotechnologies is making that...
Raja Rajeev Kumar, Mentor at IIT Startups, Chairman of the Board of Trustees, LaxmiRamaVarma Holdings International, and Founder and CEO, ChromoSoul Ventures

“Build Strong Startups, and Funding Will Follow”- Raja Rajeev Kumar, IIT Startups, LaxmiRamaVarma Holdings...

0
While AI and software startups attract attention and capital, electronics ventures often struggle for both. Raja Rajeev Kumar from IIT Startups, LaxmiRamaVarma Holdings International...

Startups

(L to R) C2i Semiconductors Founders—Vikram Gakhar, Founder & Director, Mixed Signal; Preetam Tadeparthy, Founder, CTO, VP, Engineering; Ram Anant, Founder & CEO; B.S. Dattatreya, Founder & Director, Power

Bengaluru Startup Targets AI Data Centre Power Delivery

0
C2i is building power systems that can help AI servers use electricity more efficiently and reliably. Two friends, Ram Anant and Preetam Tadeparthy, were working...
Akshar Vastarpara, Founder and CEO, Vicharak

“Our SBCs Are Designed As Complete Edge-Computing Platforms That Combine Everything On A Single...

0
An Indian startup builds affordable edge AI boards for robots, drones, and industry, positioning them as Raspberry Pi alternatives. In an EFY interview with...
(L-R) Sri Kusulu Devalla, Co-Founder and Hetendra Singh Rathore, Founder, Segritech

“We don’t just sort fruit; we match every quality grade with the right buyer.”...

0
An agritech startup has developed an AI-powered machine that sorts and grades fruits directly on farms, helping reduce post-harvest losses by connecting produce with...
Dr Naveen Yanduru, CEO, Axiro Semiconductor Private Limited

“India Can Lead In IP—If It BacksIts Own Builders”

0
Axiro Semiconductor designs RF and satellite chips, ships millions worldwide, and retains its startup mindset while tackling complex technical challenges. In a conversation with...
Dr Sanjay Ahuja, Founder and CEO of Cionlabs, India

“We are solving India-specific challenges rather than offering generic ‘black box’ IoT solutions.”

0
From hybrid mesh networking to AI-enabled edge devices, an Indian IoT startup is developing home-grown solutions to improve connectivity, strengthen privacy and support the...